02 / Research topics
Potential PhD Research Topics in Power Electronics
Explore suggested topics and the methods, tools and expertise that could support each investigation.
1
High frequency converters using gallium nitride and silicon carbide for ultra efficient electrification
Wide-bandgap devices enable faster switching, smaller passive components, and higher efficiency, yet packaging parasitics, electromagnetic interference, gate-drive constraints, and thermal stress limit deployment. The gap is a unified design methodology spanning semiconductor behavior, layout, control, and cooling. This research should develop optimized converter architectures, co-designed packaging, adaptive gate driving, and experimentally validated models that improve efficiency, power density, and reliability across automotive and renewable-energy operating conditions.
Applications and use cases
2
Grid forming power converters for resilient renewable dominated electric power systems
As synchronous generation retires, inverter-dominated grids face weak-grid instability, poor fault behavior, and inadequate frequency support. Existing grid-forming controls often trade transient stability against current limiting, protection coordination, or power quality. The proposed work should formulate theoretically grounded control strategies with adaptive virtual inertia, fast current limitation, and coordinated multi-converter operation, then validate them through real-time simulation and laboratory microgrid experiments under faults and renewable intermittency.
Applications and use cases
3
Solid state transformers enabling flexible medium voltage distribution networks and transportation electrification
Future distribution networks require controllable voltage conversion, bidirectional power flow, and direct integration of storage, renewables, and vehicle charging. Conventional transformers lack these capabilities, while solid-state transformers remain expensive, complex, and reliability-limited. Future research should create modular multilevel architectures with fault-tolerant operation, reduced component stress, and coordinated energy management. Objectives include improving efficiency, insulation coordination, lifetime prediction, and economic viability through scaled prototypes and system-level demonstrations.
Applications and use cases
4
Wireless power transfer systems for dynamic electric vehicle charging and autonomous transportation
Wireless charging can remove connector limitations and reduce battery-size requirements, but misalignment, coil interoperability, stray fields, thermal constraints, and dynamic charging coordination remain unresolved. Wireless systems need robust control that preserves efficiency during vehicle motion and variable coupling. Research should develop interoperable magnetic couplers, compensation networks, foreign-object detection, and adaptive power control, followed by roadway-scale validation addressing safety, standards, infrastructure cost, and grid interaction.
Applications and use cases
5
Physics informed artificial intelligence for predictive control and fault diagnosis in power converters
Artificial intelligence promises adaptive control and early fault detection, yet purely data-driven models can be unsafe, opaque, and unreliable outside training conditions. Physics-informed methods offer a route to combine converter equations with measured data and embedded constraints. This research should develop explainable neural models, uncertainty-aware predictive control, and online condition monitoring, demonstrating improved transient performance and earlier diagnosis than conventional observers across changing loads, temperatures, and device aging.
Applications and use cases
6
Ultra high power density converters through advanced thermal management and additive manufactured magnetics
Higher switching frequency and compact packaging increase heat flux, hotspot formation, and lifetime uncertainty, preventing further converter miniaturization. Conventional heatsinks and magnetic components are poorly optimized for three-dimensional thermal-electromagnetic integration. This research should co-design cooling channels, embedded substrates, additive-manufactured cores, and high-frequency windings using multiphysics optimization. The goal is a validated converter platform delivering higher power density without sacrificing efficiency, insulation integrity, manufacturability, or service life.
Applications and use cases
7
Medium voltage multilevel converters for renewable energy and high power industrial applications
Medium-voltage applications demand efficient conversion with low harmonic distortion, but multilevel converters suffer from capacitor imbalance, unequal semiconductor stress, complex fault management, and costly control hardware. The opportunity is to develop scalable topologies and modulation methods that reduce sensors and improve ride-through capability. Research should establish generalized balancing theory, adaptive modulation, and fault-tolerant operation, validated on a medium-voltage prototype or high-fidelity real-time test platform.
Applications and use cases
8
Reliability centered design of power modules under mission profiles and variable environmental stress
Power converter failures increasingly determine lifecycle cost, especially under rapid thermal cycling, humidity, vibration, and intermittent mission profiles. Existing qualification tests often poorly represent real operating conditions and overlook interactions among die, bond wires, substrates, and capacitors. Reliability research should link mission-profile data to physics-of-failure models, online health indicators, and design optimization. The outcome should be validated remaining-useful-life predictions and practical derating guidelines for longer-lived converter systems.
Applications and use cases
9
Integrated power electronics and motor drives for electrified aircraft and high performance propulsion
Electrified aircraft require exceptionally light, efficient, fault-tolerant propulsion systems, while conventional separation of inverter, motor, cooling, and control increases mass and interconnect losses. The research gap concerns integrated electromagnetic, thermal, insulation, and control design under aerospace safety constraints. This work should develop a motor-inverter-drive package with wide-bandgap switching, advanced cooling, common-mode mitigation, and redundant operation, then quantify specific power, efficiency, fault containment, and certification readiness.
Applications and use cases
10
Sustainable circular power electronics using recyclable materials and lifecycle aware converter design
Power-electronics growth is increasing demand for critical minerals, composite materials, and difficult-to-recycle assemblies, while efficiency metrics rarely include embodied environmental impacts. Sustainable design lacks integrated methods connecting topology, materials, repairability, and end-of-life recovery. This research should develop lifecycle-aware converter optimization using recyclable substrates, modular packaging, repairable architectures, and low-impact magnetics. Demonstrations should compare carbon footprint, resource use, performance, cost, and lifetime against conventional designs.
Applications and use cases